Right Solder Paste Printer ASE
Right Automatic Vision Solder Paste Printer ASE
- User-friendly design, wide versatility
- Unique spray auto-cleaning & energy-saving paper-saving wiping
- Exclusive image processing + intelligent printing mode
- Printing area: 400*340mm / 510*340mm
- Internationally universal UVW 3-axis platform
- Machine dimensions: 1220X1355X1500mm
- Optional functions:
- Auto solder paste feeding | Stencil clogging detection
- Auto dispensing | Scraper pressure feedback
- MSE/SPI connection | Temp & humidity control
2D Paste PrintingQuality TestAnd Analysis
PCB Transport & Clamping System
Right Special Platform Calibration System
| 型号Model | ASE | |||
| 网框尺寸 Screen Frames |
清洗参数 Cleaning Parameters |
|||
| Min Size | 370*370mm | 清洗方式 Cleaning Method |
喷淋式清洗系统 Sprayng cleanng system |
|
| Max Size | 737*737mm | 干擦、湿擦、真空三种模式 Dry wpe,wet wpe,vacuum three modes |
||
| Thickness | 20-40mm | 清洗行程 Cleaning Stroke |
依据PCB板长宽自动生成 Automalic generation |
|
| PCB板参数 PCB Board Parameters |
清洗位置 Cleaning Position |
后置清洗 Post ceaning |
||
| 最小尺寸 PCB Min Size |
50×50mm | e先速磨speed | 10-200mm/sec | |
| 最大尺寸 PCB Max Size |
400×340mm(510×340mm选项) | 清洗液用量 Cleaning Fluid Consumption |
自动生成，手动可调 Auto&Manually adjustable |
|
| PCB thickness | 0.4-6mm | 清洗纸用量 Cleaning Paper Consumption |
自动生成，手动可调 Auto&Manualy adjustable |
|
| 翘曲量 PCB Wanpage |
<1% | 影像参数 Image Parameters |
||
| PCB板边缘间隙 PCB Board Edge Clearance |
2.5mm | 影像视域 CCD FOV |
10*8mm | |
| 过板高度 Board Height |
25mm超出特制项pin | 相机类型 Camera Type |
130万像素数字相机 130 megapxel digital camera |
|
| 传送高度 Transport Height |
900±40mm | 摄像系统 Camera System |
几何匹配、上下成像视觉 Geometric matching,up and down imaging vision |
|
| 取像CT(流光) Camera Cycle Time |
150ms | |||
| 传送方向 Transport Drection |
左-右；右-左；同进同出 Left-Right;Right-Left;nand out the same |
|||
| 基准点类型 Fiducal Mark Types |
标准形状基准点 Standard Fiducial Mark Shape |
|||
| 运输速度 Transport Speed |
分段控制，1500mm/s(Max) Segment control,1500mm/s(Max) |
|||
| □方形，○圆形，△三角形，◇菱形，+十字形、 焊盘、开孔 □square,Ocircle,△ triangle,◇ diamond shaped, +ten cross,welding,opening |
||||
| 运输方式 Transport Mode |
一段式运输轨道 One section transportalion track |
|||
| PCB支撑方式 PCB Support System |
磁性顶针 Magnetic Pin |
|||
| 焊盘、异形、开孔 Pad、profle、hole |
||||
| 等高块 Support Block |
||||
| Mark尺寸 Mark size |
0.1-6mm | |||
| 手动调节顶升平台 Manual Up-down table |
||||
| 防呆点数量 Stay Away Number |
Max:1pcs | |||
| 最大PCB板重量 Maximum PCB Board Weight |
4kg | |||
| Mark数量 Mark Number |
Max:4pcs | |||
| 印刷参数 Printing Parameters |
||||
| 2D检测 2D Detection |
检测少锡/漏印/连锡 Detect low tinvmssing print/continuous tin |
|||
| 印刷速度 Printing Speed |
10-200mm/sec | |||
| 功能配置 Function Configuration |
||||
| 印刷压力 Printing Pressure |
0.5-20Kg | |||
| 安全控制 Safely Control |
开门停机，异常报警 Door open to stop,abnomal alam |
|||
| 印刷模式 Printing Mode |
单或双刮刀印刷 Single or double squeegee printing |
|||
| Smart UI | 全新界面，快捷键操作 Brand new interface,shortaut key operation |
|||
| 脱模距离 Release Distance |
0-20mm | |||
| 权限设定 Pemission Setting |
可自由设定，对操作员、技术员、工程师设定权限划分 It can be freely set,and the authority division of operators,technicians and engneers can be set |
|||
| 脱模速度 Release Speed |
0-20mm/sec | |||
| 设备参数 Equipment Parameters |
||||
| 脱模方式 Snap-Mode |
分三段脱模 Three stage demolding |
|||
| 使用空气 Air Required |
4-6Kgfcm | |||
| 刮刀类型 Squeegee Type |
胶刮刀/钢刮刀(角度45°/55°/60°) Rubber squeegee/Steel squeegce (Angle 45°/55°/60°) |
|||
| 耗气量 Air Consumption |
约5L/mn | |||
| 印刷精度 Dnoting Acaurao |
工作环境温度 Working Temperature |
-20℃~+45℃ | ||
| 重复定位精度 Repeat Postion Acuracy |
±0.01mm | 工作环境湿度 Working Environment Humidity |
30%-60% | |
| 印刷精度 Printing Accuracy |
±0.025mm | 电源 Power Input |
AC:220±10%,50/60HZ 2.5KW | |
| 印刷周期(不含清洗) Cyde Tme(Excluding Cleaning) |
7s | 控制方法 Control Method |
PC Conro | |
| 印刷周期(含清洗) Cyce Time(lncluding Cleaning) |
14s | 机器重量 Machine Weight |
Approx:1000Kg | |
| 换线时间 Changeover Time |
5Min | 机器外形尺寸 Machine Dimensions |
1220(L)×1375(M)×1500(H)mm | |
Need Help Finding the Right Product?
Our team of experts is here to guide you in selecting the best solutions for your needs. Please feel free to reach us for support.